Products

Below is information about some of our popular products. To get a full listings of all products we sell and service, please contact us.

GMP Coating Pan and Spray System

Item Number: CP36A

    • 316 Stainless Steel 36 in. Coating Pan w/baffles
    • Approximate capacity 50kgs (depending on product)
    • Automatic Spraying System with 316 SS Contact Parts
    • Hot Air Blower
    • 75 liter 316 Stainless Steel tank with stirrer
    • Other size systems available

    GMP Size Reduction Mill

    Item Number: 00NW1

    • Brand New
    • 316 Stainless Steel Contact Parts (non-contact parts are 304 SS, and 304 SS clad)
    • 360° screen and 14 blades for high output of wet and dry materials
    • Many screen mesh sizes available
    • Easy to clean
    • Quiet operation
    • Advanced design and safety features
    • Belt drive and direct drive models available

    GMP V Blender

    Item Number: 00NW2

    • Brand NEW
    • Contact Parts 316 Stainless Steel – mirror finish
    • Other parts 304 Stainless Steel (or 304 SS covered steel) – matt finish
    • Batch Capacity: Approximately 100 kgs (220 lbs) depending on bulk density of product
    • 316 Stainless Steel Butterfly Discharge valve
    • Safety Guarding, AMP Meter, Digital Timer
    • Cone RPM: approximately 28 rpm
    • Discharge height: 29.5″ (750mm) other discharge heights available
    • 5 hp, 3 ph, 60hz, 230/460 volt motor

    GMP Ribbon Blender

    Item Number: 00NW3

    • Brand NEW
    • Contact Parts 316 Stainless Steel – mirror finish
    • Other parts 304 Stainless Steel (or 304 SS covered steel) – matt finish
    • Batch Capacity: Approximately 100 kgs (220 lbs) depending on bulk density of product
    • Center Butterfly Discharge valve (316 SS)
    • Safety Switches, Amp Meter, Digital Timer
    • Cone RPM: approximately 28 rpm
    • Discharge Height: 29.5″ (750mm) Other discharge heights available
    • 5 hp, 3 ph, 60hz, 230/460 volt motor

    GMP Bi-Layer “D” Tablet Press

    Item Number: 00NW4

    • Brand NEW
    • Double sided 27 station “D”
    • Keyways in upper punch sockets for shaped tablets
    • Approximately Capacity 27,000 – 64,000 Bi-layer tablets per hour
    • Maximum tablet diameter 1″ (25mm)
    • Maximum Operating Pressure 10 tons
    • Adjustable Upper Punch Penetration
    • Safety Interlocked Guarding
    • Easy conversion from Bi-Layer to convention tablets
    • Optional variable speed Rotary Feeders
    • Optional VFD main control

    GMP D3 16

    Item Number: 00NW5

    • Brand NEW
    • 16 station “D”
    • Keyways in upper punch sockets for shaped tablets
    • Approximately Capacity 13,500 – 40,000 tablets per hour
    • Maximum tablet diameter 1″ (25mm)
    • Maximum Operating Pressure 10 tons
    • Adjustable Upper Punch Penetration
    • Safety Interlocked Guarding
    • Optional variable speed Rotary Feeder
    • Optional VFD main control

    Fette P2000 29 station tablet press

    Item Number: A1701

    • Uses D tooling
    • 1.5“ (38.1mm) die diameter
    • Up to 1“ (25mm) tablet diameter
    • Pre-Compression
    • Keyways in upper punch sockets
    • Paint free tableting zone
    • 480v, 5.3 hp (4.0 kw) 60 hz Motor
    • Stainless Steel Electrical Box
    • Operation Manual Included
    Plus Many More. Contact Us With Any Questions!

    Need Help?

    Contact Us Today!

    Phone:
    (607) 674-4552

    Email:
    info@anthonllc.com

    Address:
    19 West State Street
    Sherburne, NY 13460

    Mailing Address:
    Anthonl LLC
    PO Box 628
    Sherburne, NY 13460